Monthly Archives: March 2011
Spill Clean-Up Plans
Develop a spill clean-up plan, and train staff regarding clean up procedures. The plan may be simple but accurate, indicating the role of staff members in the event of a spill and the location of clean up materials. Accidental spills are often a common occurrence within an industrial workplace.
If not controlled, spills and leaks can pose a serious threat to the environment and safety of personnel as they often lead to storm water pollution or hazardous situations.
Spill Clean-Up Procedures
For large scale hazardous spills, contact the Fire Brigade (999) immediately for assistance with clean-up operations.
For clean-up of minor spills contact us
Stop the source of the spill immediately (if safe to do so), appropriate to the chemical type (refer to data sheet). This will reduce the level of contamination and impact on the environment.
Control the flow and contain the spill appropriate to the chemical type (refer to DATA SHEET). Prevent the spill from entering the storm water system by isolating or blocking off drain inlets.
Clean Up the Spill
Clean up the spill promptly by following the relevant Data Sheets
Duty to Report
If a spill occurs where pollution causes or threatens material harm to the environment then you must notify the Appropriate Regulatory Authority (ARA) as soon as you can after you become aware of the incident. It is an offence under the Protection of the Environment Act 1997 not to report the spill in these circumstances.
Spill Clean Up Plans
Develop a spill clean-up plan, and train staff regarding clean up procedures. The plan may be simple but accurate, indicating the role of staff members in the event of a spill and the location of clean up materials.
Dry clean cleaning up spills without the use of water
Dry Cleaning is recommended to prevent spill flowing into storm water inlets. It involves using absorbent material such as absorbent granules, sand, saw dust or flour to mop up spills. There are numerous products available commercially which promote this absorbent cleaning method.
Sludge builds up in tanks, ponds, lagoons and vessels over time. The sludge needs to be removed at regular intervals in order to maintain a smooth running operation. Sludge removal can be a hazardous task if performed manually. For this reason tank, ponds, lagoons and vessel sludge removal is carried out remotely wherever possible, or with minimum man-entry in confined spaces With the aid of jet vac tankers or a sludge pump, Here at Airload Environmental ltd we can provide both. We can handle all types of sludge from Hazardous to non-Hazardous sludge and we have many ways of removing waste sludge. We were famous at the old Rotherham engineering steels (R,E,S) site for removing the heaviest sludge from the clarifier and thickener tanks, So if you need a good reliable sludge removal company look no further, We are here Airload Environmental ltd and our slogan is Suckers For Sludge
Airload Environmental can safely remove and dispose of all types of spray booth waste; our fully trained operators have plenty of experience with emptying and jet washing many types of spray booths with our jet vac tankers.
All of the waste is taken to a licensed waste treatment facility.
For more info about Spray Booth Waste contact Airload Environmental ltd on